Home >  cpe and pe >  CPE 135A Plastic Additives, Chlorinated Polyethylene
CPE 135A Plastic Additives, Chlorinated Polyethylene

CPE 135A Plastic Additives, Chlorinated Polyethylene

  CPE Resin/Chlorinated Polyethylene/Resin Mainly for Plastic, Elastomer Material Size:24; Warranty:Hydraulics Warranty; Application:Drilling rigs, Dynamometers,...
  • INA
  • 135A
  • 76.2 mm
  • 150 mm
  • 45.796 mm
  • 88.9 mm
  • 198.438 mm
  • 4.763 mm
  • 35.719 mm
  • 180.975 mm
  • 95.25 mm
  • 31.75 mm
  • 250.825 mm
  • 279.4 mm
  • 330.2 mm
  • 22.225 mm
  • 53.975 mm

Product Details

da:76.2 mm Da:150 mm
Ca:45.796 mm A1:88.9 mm
A2:198.438 mm S:4.763 mm
ba:35.719 mm H:180.975 mm
H1:95.25 mm H2:31.75 mm
J min.:250.825 mm J max.:279.4 mm
L:330.2 mm N1:22.225 mm
R1:53.975 mm R2:22.225 mm
RG:3/8 NPT PG:1/8 NPT
h:34.925 mm Housing:SAF 517
Stabilizing ring:SR-17-14 Taconite seal:TER 54
End plug (suffix Y):EPR 9 Max. speed for Taconite seal:1050 r/min
P60°:84.5 kN P90°:50.7 kN
P120°:31.6 kN P150°:28.5 kN
P180°:34.7 kN Pa:9.25 kN
Mass pillow block:18 kg Cap bolt:2 x 5/8-11 UNC
Cap bolt recommended tightening torque:149.1 N·m Cap bolt, SAE grade:5
Appropriate attachment bolt size G:0.75 in Initial grease fill:110.56 g

Product Description

 

CPE Resin/Chlorinated Polyethylene/Resin Mainly for Plastic, Elastomer MaterialSize:24; Warranty:Hydraulics Warranty; Application:Drilling rigs, Dynamometers, Logging equipment, Marine mooring systems, Slip clutches, Tension brakes, Unwind stands; Product Name:Eaton Airflex WCB2 Series Water Cooled Brakes; Disc Quantity:1; Product Width:11 in; Catalog Number:146465A-NOGEAR; Product Height:30.41 in; Product Weight:577 lb; Clutch-Brake Type:WCB2; Product Length/Depth:30.41 in;
Chemical Auxiliary Agent CPE Chlorinated PolyethyleneOEM Part Number:LPG5L6B06; Efficiency:Beta 6[c] >= 1000 (ISO 16889 & & DFE); Collapse Rating:150; Max Temp (F):225; Adhesive:Epoxy; By-Pass:None; End Cap:Corrosion Resistant CS/AL; Flow Direction:Out/In; Media Type:Microglass supported both sides; Recommended Change Out (psid):X; O.D.:5.97; I.D.:4.13; Length:16.75; Seal Material & Type:Buna O-Ring; Quantity per Carton:1; Weight per Filter (lbs):7.0000;
CPE135A Chlorinated PolyethyleneModel Code:EASY PEDAL ADVANTAGE; Pre-Damper:No; Clutch Size:15.5 in; Product Name:Eaton Easy Pedal Advantage Manual Adjust Clutch; Product Width:17 in; Torque rating:1700 ft lb; Catalog Number:308925-82; Product Height:7.25 in; Product Weight:132 lb; Facing Material:Ceramic; Number of Discs:2 EA; Input shaft size:2.00" - 10; Portfolio rating:Best; Product Diameter:17 in; Hydraulic Linkage:No; Transmission Type:Manual;
High Quality Chlorinated Polyethylene CPE 135APre-Damper:No; Clutch Size:15.5 in; Product Name:Eaton EverTough Self-Adjust Clutch; Product Width:17 in; Torque rating:1650 ft lb; Catalog Number:109701-51AM; Product Height:7.25 in; Product Weight:131 lb; Facing Material:Ceramic; Input shaft size:2.00" - 10; Portfolio rating:Better; Product Diameter:17 in; Hydraulic Linkage:Yes; Transmission Type:Manual; Damper Spring Count:9 EA; Product Length/Depth:17 in;
Chlorinated Polyethylene CPE Window Profile Material CPE 135A Chlorinated PolyethyleneOEM Part Number:HP930L16-12MB; Efficiency:Beta 12{c} >= 1000 (ISO16889 & DFE); Collapse Rating:150; Max Temp (F):225; Adhesive:Epoxy; By-Pass:None; End Cap:Corrosion Resistant CS/AL; Flow Direction:Out/In; Media Type:Microglass supported both sides; Recommended Change Out (psid):25; O.D.:6.25; I.D.:3.56; Length:15.75; Seal Material & Type:Buna O-Ring; Quantity per Carton:1; Weight per Filter (lbs):5.0000;
PVC Pipe Stabilizer CPE135A Chlorinated PolyethyleneCategory:Bearings; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:1; Product Group:M06110;
ODM Standard High Chlorinated Polyethylene CPE for ChemicalOEM Part Number:HC9100FAS13Z; Efficiency:Beta 12[c] >= 1000 (ISO 16889 & DFE); Collapse Rating:150; Max Temp (F):225; Adhesive:Epoxy; By-Pass:None; End Cap:Corrosion Resistant CS/AL; Flow Direction:Out/In; Media Type:Microglass supported both sides; Recommended Change Out (psid):25; O.D.:2.75; I.D.:1.34; Length:13; Seal Material & Type:Viton O-Ring; Quantity per Carton:1; Weight per Filter (lbs):4.0000;
Good Quality Chlorinated Polyethylene CPE 135A for PVC PipeBearing number:5208AZ; Size (mm):40x80x30.2; Bore Diameter (mm):40; Outer Diameter (mm):80; Width (mm):30.2; d:40 mm; D:80 mm; B:30.2 mm; C:30.2 mm; Angle (α):20 °; r min.:1.1 mm; Weight:0.570 Kg; Basic dynamic load rating (C):37,5 kN; Basic static load rating (C0):28,7 kN;
CPE Chlorinated Polyethylene 135 aModel Code:EverTough; Pre-Damper:No; Clutch Size:15.5 in; Product Name:Eaton EverTough Manual Adjust Clutch; Product Width:17 in; Torque rating:2050 ft lb; Catalog Number:108925-25AM; Product Height:7.25 in; Product Weight:133 lb; Facing Material:Ceramic; Number of Discs:2 EA; Input shaft size:2.00" - 10; Portfolio rating:Better; Product Diameter:17 in; Hydraulic Linkage:No; Transmission Type:Manual;
Chemical Auxiliary Agent CPE 135A Chlorinated PolyethyleneWeight:95.0 LB; Mounting:Flange Mount; Rotation:Right Hand (CW); Model No.:4520V50A8-86DD22R; Port Size:3 1/2; Port Type:Flange; Shaft Key:3/8 in; Pilot Type:Standard Pilot; Shaft Dia.:1.5 in; Shaft Type:Straight w/ Key; Pump Series:4520V; Shaft Length:3 7/16 in; Seal Material:Buna-N; Max. RPM [Max:1800; Minor Diameter:N/A; Mounting Flange:SAE C, 2 Bolt; Shaft Seal Type:Single Shaft Seal; Spline Description:N/A;

 

Difference Between PE Gloves, CPE Gloves and TPE Gloves

Aug 26, 2020 — PE is short for polyethylene. There are many types of PE gloves including HDPE gloves, LDPE gloves, CPE gloves and TPE Gloves.

4 VPN and Connectivity Services

Customer Edge (CE) routers are those routers at the customer premises that have a direct interface to the PE router. These are sometimes known as CPE (Customer ...

Chlorinated polyethylene - Wikipedia

Chlorinated polyethylene (PE-C or CPE) is an inexpensive variation of polyethylene, where chlorine is substituted for some of the hydrogen atoms.

Things To Consider When Purchasing Disposable CPE Gloves

Dec 2, 2021 — You can easily choose one that suits your needs. What is the CPE Glove? CPE Gloves Manufacturer Cast Polyethylene gloves are transparent gloves ...

What's differences among PE CPE TPE Gloves - Pidegree ...

Jul 31, 2020 — From 2000, a new PE gloves appreared in the maker, it is CPE gloves .It is heavier, so it is much durable and stronger than HDPE, LDPE gloves .

CPE vs. TPE Gloves: A Quick Guide - Omni International Corp.

Oct 16, 2019 — CPE gloves are made of polyethylene, a kind of resin (i.e., organic compound) created during the polymerization process of ethynylene.

Differences among CPE Gloves, TPE Gloves and PE Gloves

CPE and TPE Gloves are much stronger than PE, but more expensive than it, and can't be so thinner. TPE Gloves are called second generation of CPE gloves too, ...

Why we normal people should choose CPE or TPE gloves

Aug 14, 2021 — As you see in the table, PE gloves are sealed different from CPE and TPE gloves, so the sealed temperature is much lower than them, this is one ...

 

CPE 135A Plastic Additives, Chlorinated Polyethylene Video

 

Related News

Copyright © 2017 - 2024CPE IMPACT MODIFIER MANUFACTURER All Rights Reserved